*spell.txt*	For Vim version 7.0aa.  Last change: 2005 Jun 07


		  VIM REFERENCE MANUAL	  by Bram Moolenaar


Spell checking						*spell*

1. Quick start			|spell-quickstart|
2. Generating a spell file	|spell-mkspell|
3. Spell file format		|spell-file-format|

{Vi does not have any of these commands}

Spell checking is not available when the |+syntax| feature has been disabled
at compile time.

==============================================================================
1. Quick start						*spell-quickstart*

This command switches on spell checking: >

	:setlocal spell spelllang=en_us

This switches on the 'spell' option and specifies to check for US English.

The words that are not recognized are highlighted with one of these:
	SpellBad	word not recognized
	SpellRare	rare word
	SpellLocal	wrong spelling for selected region

Vim only checks words for spelling, there is no grammar check.

To search for the next misspelled word:

							*]s* *E756*
]s			Move to next misspelled word after the cursor.
			A count before the command can be used to repeat.
			This uses the @Spell and @NoSpell clusters from syntax
			highlighting, see |spell-syntax|.

							*[s*
[s			Like "]s" but search backwards, find the misspelled
			word before the cursor.

							*]S*
]S			Like "]s" but only stop at bad words, not at rare
			words or words for another region.

							*[S*
[S			Like "]S" but search backwards.


To add words to your own word list:

							*zg*
zg			Add word under the cursor as a good word to
			'spellfile'.  In Visual mode the selected characters
			are added as a word (including white space!).

							*zw*
zw			Add word under the cursor as a wrong (bad) word to
			'spellfile'.  In Visual mode the selected characters
			are added as a word (including white space!).

							*:spellg* *:spellgood*
:spellg[ood] {word}	Add [word} as a good word to 'spellfile'.

:spellw[rong] {word}	Add [word} as a wrong (bad) word to 'spellfile'.

After adding a word to 'spellfile' its associated ".spl" file will
automatically be updated.


PERFORMANCE

Note that Vim does on-the-fly spellchecking.  To make this work fast the
word list is loaded in memory.  Thus this uses a lot of memory (1 Mbyte or
more).  There might also be a noticable delay when the word list is loaded,
which happens when 'spelllang' is set.  Each word list is only loaded once,
they are not deleted when 'spelllang' is made empty.  When 'encoding' is set
the word lists are reloaded, thus you may notice a delay then too.


REGIONS

A word may be spelled differently in various regions.  For example, English
comes in (at least) these variants:

	en		all regions
	en_au		Australia
	en_ca		Canada
	en_gb		Great Britain
	en_nz		New Zealand
	en_us		USA

Words that are not used in one region but are used in another region are
highlighted with SpellLocal.

Always use lowercase letters for the language and region names.


SPELL FILES

Vim searches for spell files in the "spell" subdirectory of the directories in
'runtimepath'.  The name is: LL-XXX.EEE.spl, where:
	LL	the language name
	-XXX	optional addition
	EEE	the value of 'encoding'

Exceptions:
- Vim uses "latin1" when 'encoding' is "iso-8859-15".  The euro sign doesn't
  matter for spelling.
- When no spell file for 'encoding' is found "ascii" is tried.  This only
  works for languages where nearly all words are ASCII, such as English.  It
  helps when 'encoding' is not "latin1", such as iso-8859-2, and English text
  is being edited.

Spelling for EBCDIC is currently not supported.

A spell file might not be available in the current 'encoding'.  See
|spell-mkspell| about how to create a spell file.  Converting a spell file
with "iconv" will NOT work!

							*E758* *E759*
When loading a spell file Vim checks that it is properly formatted.  If you
get an error the file may be truncated, modified or intended for another Vim
version.


WORDS

Vim uses a fixed method to recognize a word.  This is independent of
'iskeyword', so that it also works in help files and for languages that
include characters like '-' in 'iskeyword'.  The word characters do depend on
'encoding'.

A word that starts with a digit is always ignored.


SYNTAX HIGHLIGHTING					*spell-syntax*

Files that use syntax highlighting can specify where spell checking should be
done:

   everywhere			   default
   in specific items		   use "contains=@Spell"
   everywhere but specific items   use "contains=@NoSpell"

Note that mixing @Spell and @NoSpell doesn't make sense.

==============================================================================
2. Generating a spell file				*spell-mkspell*

Vim uses a binary file format for spelling.  This greatly speeds up loading
the word list and keeps it small.

You can create a Vim spell file from the .aff and .dic files that Myspell
uses.  Myspell is used by OpenOffice.org and Mozilla.  You should be able to
find them here:
	http://lingucomponent.openoffice.org/spell_dic.html
You can also use a plain word list.

:mksp[ell] [-ascii] {outname} {inname} ...		*:mksp* *:mkspell*
			Generate a Vim spell file word lists.  Example: >
		:mkspell nl nl_NL.words
<
			When {outname} ends in ".spl" it is used as the output
			file name.  Otherwise it should be a language name,
			such as "en".  The file written will be
			{outname}.{encoding}.spl.  {encoding} is the value of
			the 'encoding' option.

			When the [-ascii] argument is present, words with
			non-ascii characters are skipped.  The resulting file
			ends in "ascii.spl".

			The input can be the Myspell format files {inname}.aff
			and {inname}.dic.  If {inname}.aff does not exist then
			{inname} is used as the file name of a plain word
			list.

			Multiple {inname} arguments can be given to combine
			regions into one Vim spell file.  Example: >
		:mkspell ~/.vim/spell/en /tmp/en_US /tmp/en_CA /tmp/en_AU
<			This combines the English word lists for US, CA and AU
			into one en.spl file.
			Up to eight regions can be combined. *E754* *755*

			When the spell file was written all currently used
			spell files will be reloaded.

:mksp[ell] [-ascii] {add-name}
			Like ":mkspell" above, using {add-name} as the input
			file and producing an output file that has ".spl"
			appended.

Since you might want to change a Myspell word list for use with Vim the
following procedure is recommended:

1. Obtain the xx_YY.aff and xx_YY.dic files from Myspell.
2. Make a copy of these files to xx_YY.orig.aff and xx_YY.orig.dic.
3. Change the xx_YY.aff and xx_YY.dic files to remove bad words, add missing
   words, define word characters with FOL/LOW/UPP, etc.  The distributed
   "src/spell/*.diff" files can be used.
4. Set 'encoding' to the desired encoding and use |:mkspell| to generate the
   Vim spell file.
5. Try out the spell file with ":set spell spelllang=xx_YY".

When the Myspell files are updated you can merge the differences:
1. Obtain the new Myspell files as xx_YY.new.aff and xx_UU.new.dic.
2. Use Vimdiff to see what changed: >
	vimdiff xx_YY.orig.dic xx_YY.new.dic
3. Take over the changes you like in xx_YY.dic.
   You may also need to change xx_YY.aff.
4. Rename xx_YY.new.dic to xx_YY.orig.dic and xx_YY.new.aff to xx_YY.new.aff.

==============================================================================
9. Spell file format					*spell-file-format*

This is the format of the files that are used by the person who creates and
maintains a word list.

Note that we avoid the word "dictionary" here.  That is because the goal of
spell checking differs from writing a dictionary (as in the book).  For
spelling we need a list of words that are OK, thus need not to be highlighted.
Names will not appear in a dictionary, but do appear in a word list.  And
some old words are rarely used and are common misspellings.  These do appear
in a dictionary but not in a word list.

There are two formats: one with affix compression and one without.  The files
with affix compression are used by Myspell (Mozilla and OpenOffice.org).  This
requires two files, one with .aff and one with .dic extension.  The second
format is a list of words.


FORMAT OF WORD LIST

The words must appear one per line.  That is all that is required.
Additionally the following items are recognized:
- Empty and blank lines are ignored.
- Lines starting with a # are ignored (comment lines).
- A line starting with "/encoding=", before any word, specifies the encoding
  of the file.  After the second '=' comes an encoding name.  This tells Vim
  to setup conversion from the specified encoding to 'encoding'.
- A line starting with "/?" specifies a word that should be marked as rare.
- A line starting with "/!" specifies a word that should be marked as bad.
- A line starting with "/=" specifies a word where case must match exactly.
  A "?" or "!" may be following: "/=?" and "/=!".
- Other lines starting with '/' are reserved for future use.  The ones that
  are not recognized are ignored (but you do get a warning message).


FORMAT WITH AFFIX COMPRESSION

There are two files: the basic word list and an affix file.  The affixes are
used to modify the basic words to get the full word list.  This significantly
reduces the number of words, especially for a language like Polish.  This is
called affix compression.

The format for the affix and word list files is mostly identical to what
Myspell uses (the spell checker of Mozilla and OpenOffice.org).  A description
can be found here:
	http://lingucomponent.openoffice.org/affix.readme ~
Note that affixes are case sensitive, this isn't obvious from the description.

Vim supports a few extras.  Hopefully Myspell will support these too some day.
See |spell-affix-vim|.

The basic word list and the affix file are combined and turned into a binary
spell file.  All the preprocessing has been done, thus this file loads fast.
The binary spell file format is described in the source code (src/spell.c).
But only developers need to know about it.

The preprocessing also allows us to take the Myspell language files and modify
them before the Vim word list is made.  The tools for this can be found in the
"src/spell" directory.


WORD LIST FORMAT					*spell-wordlist-format*

A very short example, with line numbers:

	1	1234
	2	aan
	3	Als
	4	Etten-Leur
	5	et al.
	6	's-Gravenhage
	7	's-Gravenhaags
	8	bedel/P
	9	kado/1
	10	cadeau/2

The first line contains the number of words.  Vim ignores it, but you do get
an error message if it's not there.  *E760*

What follows is one word per line.  There should be no white space before or
after the word.

When the word only has lower-case letters it will also match with the word
starting with an upper-case letter.

When the word includes an upper-case letter, this means the upper-case letter
is required at this position.  The same word with a lower-case letter at this
position will not match. When some of the other letters are upper-case it will
not match either.

The same word with all upper-case characters will always be OK.

	word list	matches			does not match ~
	als		als Als ALS		ALs AlS aLs aLS
	Als		Als  ALS		als ALs AlS aLs aLS
	ALS		ALS			als Als ALs AlS aLs aLS
	AlS		AlS ALS			als Als ALs aLs aLS

The KEP affix ID can be used to specifically match a word with identical case
only, see below.

Note in line 5 to 7 that non-word characters are used.  You can include
any character in a word.  When checking the text a word still only matches
when it appears with a non-word character before and after it.  For Myspell a
word starting with a non-word character probably won't work.

After the word there is an optional slash and flags.  Most of these flags are
letters that indicate the affixes that can be used with this word.

							*spell-affix-vim*
A flag that Vim adds and is not in Myspell is the flag defined with KEP in the
affix file.  This has the meaning that case matters.  This can be used if the
word does not have the first letter in upper case at the start of a sentence.
Example (assuming that = was used for KEP):

	word list	matches			does not match ~
	's morgens/=	's morgens		'S morgens 's Morgens
	's Morgens	's Morgens		'S morgens 's morgens

							*spell-affix-mbyte*
The basic word list is normally in an 8-bit encoding, which is mentioned in
the affix file.  The affix file must always be in the same encoding as the
word list.  This is compatible with Myspell.  For Vim the encoding may also be
something else, any encoding that "iconv" supports.  The "SET" line must
specify the name of the encoding.  When using a multi-byte encoding it's
possible to use more different affixes.

							*spell-affix-chars*
When using an 8-bit encoding the affix file should define what characters are
word characters (as specified with ENC).  This is because the system where
":mkspell" is used may not support a locale with this encoding and isalpha()
won't work.  For example when using "cp1250" on Unix.

							*E761* *E762*
Three lines in the affix file are needed.  Simplistic example:

	FOL  犭襻腭 ~
	LOW  犭襻腭 ~
	UPP  犭窳搜 ~

All three lines must have exactly the same number of characters.

The "FOL" line specifies the case-folded characters.  These are used to
compare words while ignoring case.  For most encodings this is identical to
the lower case line.

The "LOW" line specifies the characters in lower-case.  Mostly it's equal to
the "FOL" line.

The "UPP" line specifies the characters with upper-case.  That is, a character
is upper-case where it's different from the character at the same position in
"FOL".

ASCII characters should be omitted, Vim always handles these in the same way.
When the encoding is UTF-8 no word characters need to be specified.

							*E763*
All spell files for the same encoding must use the same word characters,
otherwise they can't be combined without errors.  The XX.ascii.spl spell file
generated with the "-ascii" argument will not contain the table with
characters, so that it can be combine with spell files for any encoding.

							*spell-affix-KEP*
In the affix file a KEP line can be used to define the affix name used for
keep-case words.  Example:

	KEP = ~

See above for an example |spell-affix-vim|.

							*spell-affix-RAR*
In the affix file a RAR line can be used to define the affix name used for
rare words.  Example:

	RAR ? ~

Rare words are highlighted differently from bad words.  This is to be used for
words that are correct for the language, but are hardly ever used and could be
a typing mistake anyway.


 vim:tw=78:sw=4:ts=8:ft=help:norl:
